Launch X-431 PAD VII PAD 7 Elite Plus GIII X-Prog 3 Adapter Support Key Programming/ Online Coding

Description

Product Description

Launch X-431 PAD VII PAD 7 Elite Plus GIII X-Prog 3 Adapter Support Key Programming/ Online Coding

LAUNCH X431 PAD VII comes with 13.3″ touch screen and 60 service functions, which is compatible with ADAS calibration function, TPMS service and extended modules.

Package includes:

• X-431 PAD VII Elite Full set
• X-Prog3

X431 PAD VII Elite SmartLink C VCI New Outlook:

Launch X431 PAD VII Elite Advantages:
1. With 2 Years Free Update Online
2. Support Online Programming for Car Brands: BMW, Mercedes, VW, Audi, Seat, Skoda, Porsche, Nissan, Infiniti, Subaru.
3. Support Commercial Vehicle and Passenger Car Diagnose, Support J2534, CAN FD, DoIP, J2534/D-PDU/RP1210
4. 60+ service functions: Injector, Reset Brake Bleed, Reset TPMS, Electronic Throttle Relearn, Reset DPF, Reset SAS, Reset Oil, Reset Brake, Reset BMS
5. Guided Function for VW and AUDI (V-A-G), FCA AutoAuth Access
6. Topology mapping gives a visual checking on DTCs and all systems communication status
7. Advanced coding and programming function
8. Full System Vehicle Coverage for U.S, Asian and European markets over 110 brands, which is continually updated
9. Multi-Language Supported: English, German, Italian, French, Spanish, Portuguese, Chinese, Korean, Turkish, Swedish, Japanese, Polish, Czech, Russian, Dutch, Thai, Finnish, Danish, Romanian, Arabic, Persian, Hebrew, Croatian.
10. Support ADAS calibration Function and Eight Extended Mudule: videoscope, oscilloscope, sensor box, TPMS tools, key immobilizer and battery tester.
11. Build-in repair information and training video modules help to track and fix issue fast.
12. Upgrade and expand the X-431 PAD VII Elite with more software and service via the new module ‘MALL’ as demanded

Note:
1. In United States, Canada and Mexico on programming function, X431 PAD7 can support Mercedes and BMW online coding and programming only, other brands are not available.
2. Online coding and programming functdions can’t perform at all in Spain and Portugal.
3. Supports BMW, VW, Audi, Benz online coding till 2021. Adds Nissan Renault offline programming in June 2022.
4. PAD VII ADAS Calibration, you need to buy the ADAS Devices Kit. Can Not Do ADAS Calibration by PAD VII Only
5. SmartLINK VCI remote OEM diagnosis needs purchase to activate.

Launch X431 PAD7 Functions:

• Full System Vehicle Coverage Diagnosis for U.S., Asian and European Markets Over 110 Brands, and keep updating.
• Online Programming For Benz, Bmw. Offline Programming: for VW, for Audi, Seat, Skoda, Renault, Nissan, Subaru, Hyundai, Kia, Chery, Jaguar,for Land rover, for P-orsche
• ECU Programming & Coding: J2534/RP1210/D-PDU/Do-IP/CANFD Diagnostic Protocols
• Clone Mercedes Benz ECU 2015 upwards with X431 XPROG III.
• Supports gasoline cars and diesel heavy-duty trucks (need to purchase truck software separately)
• NEW Protocols to support the vehicles of today and tomorrow: DoIP, CAN-FD, D-PDU, J2534, RP1210.
• FCA AutoAuth Access: Bypass SGM in FCA vehicles seamlessly and within seconds; *Need AutoAuth subscriptions
• Support Commercial Vehicle and Passenger Car Diagnose, Support J2534, CAN FD, DoIP.
• SmartLink 3.0 Box (also as J2534-1 & -2 Pass-thru device) allows you to refresh ECU and upgrade OE software.
• VAG Guided Function+ FCA AutoAuth Access: Bypass SGM in FCA vehicles seamlessly and within seconds; *Need AutoAuth subscriptions
• With 60 service functions: Injector, Reset Brake Bleed, Reset TPMS, Electronic Throttle Relearn, Reset DPF, Reset SAS, Reset Oil, Reset Brake, Reset BMS.etc
• Extended Modules:
  Launch X431 GIII X-PROG 3 Functions:
  1. Integrated the functions of key matching/ copy, anti-theft IC reading & writing, and ECU reading & writing, etc.
  2. Supports common ECU/ MCU/ EEPROM major manufacturers, with over 1200 product models, and constantly updating.
  3. Supports ECU replacement for all lost without disassembly for VW/AUDI non-35XX instrument (it can be read directly through independent harness without removing the IC).
  4. Supports ECU replacement for the IMMO 4th of VW/ AUDI engine;
  5. Supports ECU replacement for the IMMO 5th of VW/ AUDI Bosh and Siemens engines.
  6. Supports the all lost and replacement for the IMMO 5th of AUDI EZS, comfortable ECU, and KESSY IC.
  7. Supports the BMW F and G chassis 8HP gearbox ECU reprogramming to empty.
  8. Supports the BMW CAS4/CAS4+ module replacement.
  9. Supports the ECU cloning and replacement for BMW Siemens engines.
  10. Erase the password for Mercedes-Benz engine and gearbox within 3S.
  11. Add the function of calculating the password for the Mercedes-Benz key within 1 minute.
  12. Supports VW/ AUDI MQB platform engine ECU replacement or cloning (Read engine ECU data directly from the key).
  13. Supports ECU replacement for the fifth-generation of Audi (0AW/0B5) gearbox.
  14. Supports reading, writing & cloning the ECU for the fourth-generation of VW UDS engine.
  15. Supports BMW E chassis 8HP gearbox ECU reprogramming to empty.
  16. Works with reprogramming device to backup/ restore programming data (For Bosch/ Siemens engine ECU).

  X431 PAD VII Elite Functions:
  1. ECU Programming/ Coding
  Reliable ECU Data Backup, Faster Recovery & Less Downtime

  • When customizing your vehicle, there is always a question: will it be able to revert the changes in case of human error, system failure, or data loss that bricks the vehicle computer?
  • This is where the “Backup/Recovery ECU Data” function can prove to be very useful.
  • Unlike traditional car scanner backup methods that can be labor intensive and inconsistent, LAUNCH X431 PADVII provides a simple mechanism to back up all your ECU programming & coding data.
  • It allows you to make a copy of your current Coding, Adaptations, and other info (such as Advanced ID and Live Data) of a selected control module, and save them as a file into your scan tool as a backup.
  • To restore coding or programming values, just select the backup file you need and you’ll effortlessly get reverted back to the old settings/coding in a control module.
  • For now this function is compatible with Ben.z all series, and B.M.W F/G/I chassis.
  • **NOT universally compatible. Function menus may depend on vehicle’s make, model and year.